Due to the sudden and unforeseen loss of an Australian distributor for Accuquilt products, this range is withdrawn from sale until further notice.
The Accuquilt fabric cutters are a fantastic way to cut fabric accurately - every time! In 2011 KoolKat Quilting demonstrated the Accuquilt Studio cutter and now we are proud to bring you the less expensive Accuquilt GO! cutter and its small sibling, the Accuquilt GO! Baby. The cutters work by placing fabric on top of a die which is individual to the pattern being used (such as 2 inch finished strips). A perspex cutting mat is placed on top of the this and the resulting "Sandwich" is wound through pressure rollers which press the mat down onto the fabric which is then cut by the die. No computers, no motors - easy to use, and you will wonder how you ever did without it!
When considering purchase, you will need to select dies compatible with either the GO! only or GO! and GO! Baby. As the GO! Baby is smaller, not all dies that can be used with the larger GO! can be used with the GO! Baby. Check the product descriptions to see if the dies are compatible with your cutter. The dies are also described in terms of finished size of the block. The dies allow for a 1/4 inch seam. Hence a die cutting 2.5 inch strips will be described as a 2 inch finished size strip or block.
You will also need to purchase the perspex sheets described as cutting mats. A range of sizes is good to have on hand, but each die will indicate which size cutting mat can be used.
There may be delays of up to 4 weeks to fill orders depending on stock level held by the distributor.
Our cutting service for your fabrics using our Studio cutter is still available - contact us for details (07) 4696 8746 or firstname.lastname@example.org